Celestion TF0615
8Ω
Low frequency
Nominal diameter | 6″ / 152 mm |
Resonance | 105 Hz |
Q factor | 0.61 |
Sensitivity | 91.6 dB |
Linear excursion | ± 1.8 mm |
Program Power | 200 W |
.png)
.png)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 91.6dB
- Frequency response 85 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 105Hz
- Mechanical quality factor QMS 3.95
- Electrical quality factor QES 0.72
- Total quality factor QTS 0.61
Large signal parameters
- Maximum linear excursion xmax 1.8mm
- Air volume displaced at xmax VD 27cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 7.1Ω
- Inductance (1kHz) LE 0.47mH
- VC Diameter 38mm
- Winding height HVC 6.5mm
- Winding material Round copper
- Former material Polyimide
Magnet
- Force factor Bl 8.85N/A
- Motor constant Bl/√RE 3.33N/√W
- Air gap height HAG 6mm
- Weight 0.48kg
- Material Ferrite
Diaphragm
- Effective diameter 140mm
- Effective area SD 154cm²
- Moving mass MMS 12.1g
- Moving mass (without air load) MMD 10.7g
- Material Kevlar loaded paper
Suspensions
- Stiffness KMS 5.26N/mm
- Compliance CMS 190µm/N
- Equivalent volume to the compliance VAS 6.41L
- Mechanical resistance RMS 2.01N·s/m
- Surround material Cloth-sealed
Dimensions
- Nominal diameter 6″
- 152mm
- Overall diameter 178mm
- Baffle cutout diameter 147mm
- Overall depth 74mm
- Volume occupied by the driver (estimated) 0.48L
- Net weight 1.4kg
- Frame material Pressed steel
.jpg)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





