PRV Audio 6MR500-NDY
4Ω
8Ω
Mid-range
Nominal diameter | 6″ / 152 mm |
Resonance | 105 Hz |
Q factor | 0.53 |
Sensitivity | 92.9 dB |
Linear excursion | ± 4.2 mm |
Program Power | 500 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.9dB
- Frequency response 90 - 13000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 105Hz
- Mechanical quality factor QMS 22.73
- Electrical quality factor QES 0.54
- Total quality factor QTS 0.53
Large signal parameters
- Maximum linear excursion xmax 4.2mm
- Air volume displaced at xmax VD 60cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.2Ω
- Inductance (1kHz) LE 0.12mH
- VC Diameter 50mm
- Winding height HVC 11.2mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 9.84N/A
- Motor constant Bl/√RE 3.95N/√W
- Air gap height HAG 5.5mm
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 12.9g
- Moving mass (without air load) MMD 11.6g
Suspensions
- Stiffness KMS 5.59N/mm
- Compliance CMS 179µm/N
- Equivalent volume to the compliance VAS 5.13L
- Mechanical resistance RMS 0.37N·s/m
Dimensions
- Nominal diameter 6″
- 152mm
- Overall diameter 165mm
- Baffle cutout diameter 142mm
- Overall depth 82mm
- Flange thickness 8mm
- Mounting depth 74mm
- Volume occupied by the driver (estimated) 0.51L
- Net weight 1.51kg
- Frame material Die Cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





