LaVoce CSF061.70K
8Ω
Coaxial
Nominal diameter | 6.5″ / 165 mm |
Resonance | 97 Hz |
Q factor | 0.69 |
Sensitivity | 90 dB |
Linear excursion | ± 3.9 mm |
Program Power | 300 W |
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 90dB
- Frequency response 95 - 20000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 97Hz
- Mechanical quality factor QMS 3.76
- Electrical quality factor QES 0.85
- Total quality factor QTS 0.69
Large signal parameters
- Maximum linear excursion xmax 3.9mm
- Maximum excursion before damage xlim 6.4mm
- Air volume displaced at xmax VD 56cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.3mH
- VC Diameter 44mm
- Winding height HVC 10.7mm
- Winding material Edgewound CCA
- Former material Glass Fiber
Magnet
- Flux density B 0.95T
- Force factor Bl 6.9N/A
- Motor constant Bl/√RE 2.92N/√W
- Air gap height HAG 6mm
- Diameter 130mm
- Height 14mm
- Material Ferrite
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 11.9g
- Moving mass (without air load) MMD 10.7g
- Material Waterproof Treated Paper
Suspensions
- Stiffness KMS 4.35N/mm
- Compliance CMS 230µm/N
- Equivalent volume to the compliance VAS 6.5L
- Mechanical resistance RMS 1.93N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 6.5″
- 165mm
- Volume occupied by the driver 0.7L
- Net weight 2.0kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





