Ciare HWG130
4Ω
8ΩWoofer
Nominal diameter | 5″ / 130 mm |
Resonance | 40 Hz |
Q factor | 0.34 |
Sensitivity | 85.6 dB |
Linear excursion | ± 6.5 mm |
Program Power | 260 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 85.6dB
Thiele & Small parameters
- Resonance frequency (free air) fS 40Hz
- Mechanical quality factor QMS 4.80
- Electrical quality factor QES 0.36
- Total quality factor QTS 0.34
Large signal parameters
- Maximum linear excursion xmax 6.5mm
- Air volume displaced at xmax VD 57cm³
- Power handling P 130W
- Program power Pmax 260W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 2.7Ω
- Inductance (1kHz) LE 0.6mH
- VC Diameter 38mm
- Winding height HVC 16mm
- Former material Kapton
Magnet
- Force factor Bl 5N/A
- Motor constant Bl/√RE 3.04N/√W
- Air gap height HAG 8mm
Diaphragm
- Effective diameter 105mm
- Effective area SD 87cm²
- Moving mass MMS 12.8g
- Moving mass (without air load) MMD 12.2g
- Material Doped cellulose fiber
Suspensions
- Stiffness KMS 0.838N/mm
- Compliance CMS 1194µm/N
- Equivalent volume to the compliance VAS 12.5L
- Mechanical resistance RMS 0.67N·s/m
- Surround material Rubber
- Spider material Cotton fabric
Dimensions
- Nominal diameter 5″
- 130mm
- Overall diameter 146mm
- Baffle cutout diameter 117mm
- Overall depth 77mm
- Flange thickness 6mm
- Mounting depth 71mm
- Volume occupied by the driver (estimated) 0.49L
- Net weight 1.7kg
- Frame material Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





