Ciare PWA8.50
8Ω
Woofer
Nominal diameter | 8″ / 200 mm |
Resonance | 74 Hz |
Q factor | 0.38 |
Sensitivity | 92.3 dB |
Linear excursion | ± 6.8 mm |
Program Power | 500 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.3dB
- Frequency response 70 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 74Hz
- Mechanical quality factor QMS 5.50
- Electrical quality factor QES 0.41
- Total quality factor QTS 0.38
Large signal parameters
- Maximum linear excursion xmax 6.8mm
- Maximum excursion before damage xlim 20mm
- Air volume displaced at xmax VD 154cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.0Ω
- Inductance (1kHz) LE 0.82mH
- VC Diameter 50mm
- Winding height HVC 17mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 12.7N/A
- Motor constant Bl/√RE 5.68N/√W
- Air gap height HAG 7mm
- Material Ferrite
Diaphragm
- Effective diameter 170mm
- Effective area SD 227cm²
- Moving mass MMS 28g
- Moving mass (without air load) MMD 25.6g
- Material Water repellent
Suspensions
- Stiffness KMS 6.14N/mm
- Compliance CMS 163µm/N
- Equivalent volume to the compliance VAS 12L
- Mechanical resistance RMS 2.37N·s/m
- Surround material M-Roll - Polycotton
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 200mm
- Baffle cutout diameter 186mm
- Overall depth 96mm
- Flange thickness 9mm
- Mounting depth 87mm
- Volume occupied by the driver (estimated) 0.92L
- Net weight 2.7kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





