DB Drive WDX10G2.4
2x4Ω
F 2x4ΩSubwoofer
| Nominal diameter | 10″ / 165 mm |
| Resonance | 46.1 Hz |
| Q factor | 0.56 |
| Sensitivity | 83.7 dB |
| Linear excursion | ± 20 mm |
| Program Power | 2200 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 83.7dB
Thiele & Small parameters
- Resonance frequency (free air) fS 46.1Hz
- Mechanical quality factor QMS 5.48
- Electrical quality factor QES 0.62
- Total quality factor QTS 0.56
Large signal parameters
- Maximum linear excursion xmax 20mm
- Air volume displaced at xmax VD 658cm³
- Power handling P 1100W
- Program power Pmax 2200W
Voice Coil
- Nominal impedance Z 2 x 4Ω
- DC resistance (in series) RE 6.4Ω
- Inductance (1kHz, in series, estimated) LE 4.89mH
- VC Diameter 76.2mm
- Former material Anodized aluminum
Magnet
- Force factor (in series) Bl 24.7N/A
- Motor constant Bl/√RE 9.76N/√W
Diaphragm
- Effective diameter 205mm
- Effective area SD 329cm²
- Moving mass MMS 204g
- Moving mass (without air load) MMD 199g
- Material Non-Pressed paper
Suspensions
- Stiffness KMS 17.2N/mm
- Compliance CMS 58µm/N
- Equivalent volume to the compliance VAS 8.9L
- Mechanical resistance RMS 10.8N·s/m
- Surround material Foam
Dimensions
- Nominal diameter 10″
- 165mm
- Overall diameter 279mm
- Baffle cutout diameter 239mm
- Mounting depth 162mm
- Volume occupied by the driver (estimated) 1.9L
- Frame material Aluminium
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)