PowerBass 3XL-1020D
2x1Ω
2x2Ω
Subwoofer
| Nominal diameter | 10″ / 254 mm |
| Resonance | 48.7 Hz |
| Q factor | 0.61 |
| Sensitivity | 84.1 dB |
| Linear excursion | ± 19 mm |
| Program power | 1600 W |
.webp)
.webp)
.webp)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.1dB
- Frequency response 35 - 450Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 48.7Hz
- Mechanical quality factor QMS 4.13
- Electrical quality factor QES 0.72
- Total quality factor QTS 0.61
Large signal parameters
- Maximum linear excursion (one way) xmax 19mm
- Air volume displaced at xmax VD 709cm³
- Power handling P 800W
- Program power Pmax 1600W
- Peak power Ppeak 1600W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.9Ω
- Inductance (1kHz, in series, estimated) LE 3.35mH
- VC Diameter 76.2mm
- Winding material Copper Clad Aluminium
- Former material BASV
Magnet
- Force factor (in series) Bl 20N/A
- Motor constant Bl/√RE 10.1N/√W
- Weight 6.48kg
- Material Y-35 strontium ferrite
Diaphragm
- Effective diameter 218mm
- Effective area SD 373cm²
- Moving mass (including air load) MMS 242g
- Moving mass MMD 237g
- Material DDC Multi-Layered Non-Pressed Paper Cone with Pulp Fibers Reinforcements
Suspensions
- Stiffness KMS 22.7N/mm
- Compliance CMS 44µm/N
- Equivalent volume to the compliance VAS 8.71L
- Mechanical resistance RMS 17.9N·s/m
- Surround material High Roll Foam
Dimensions
- Nominal diameter 10″
- 254mm
- Mounting depth 216mm
- Volume occupied by the driver 5.1L
- Frame material Cast Aluminium
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.webp.webp)