PRV Audio RS10-SUBD4
2x4Ω
Subwoofer
Nominal diameter | 10″ / 254 mm |
Resonance | 48.5 Hz |
Q factor | 0.69 |
Sensitivity | 84.4 dB |
Linear excursion | ± 17.5 mm |
Program Power | 1000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.4dB
Thiele & Small parameters
- Resonance frequency (free air) fS 48.5Hz
- Mechanical quality factor QMS 10.00
- Electrical quality factor QES 0.74
- Total quality factor QTS 0.69
Large signal parameters
- Maximum linear excursion xmax 17.5mm
- Air volume displaced at xmax VD 578cm³
- Power handling P 500W
- Program power Pmax 1000W
- Peak power Ppeak 2000W
Voice Coil
- Nominal impedance Z 2 x 4Ω
- DC resistance (in series) RE 6.8Ω
- Inductance (1kHz, in series) LE 6.16mH
- VC Diameter 65.5mm
- Winding height HVC 40mm
- Winding material Copper
- Former material Black Aluminum
Magnet
- Force factor (in series) Bl 23.5N/A
- Motor constant Bl/√RE 9.02N/√W
- Air gap height HAG 10mm
Diaphragm
- Effective diameter 205mm
- Effective area SD 330cm²
- Moving mass MMS 199g
- Moving mass (without air load) MMD 194g
Suspensions
- Stiffness KMS 18.5N/mm
- Compliance CMS 54µm/N
- Equivalent volume to the compliance VAS 8.22L
- Mechanical resistance RMS 6.06N·s/m
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 264mm
- Baffle cutout diameter 232mm
- Overall depth 182mm
- Flange thickness 14mm
- Mounting depth 168mm
- Volume occupied by the driver (estimated) 3.8L
- Net weight 9.65kg
- Frame material Stamped Steel
.png)
Export this driver to a simulation software:
Closed Box Simulator·





