DB Drive WDX10G5.4
2x2Ω
2x4Ω
Subwoofer
| Nominal diameter | 10″ / 254 mm |
| Resonance | 42.6 Hz |
| Q factor | 0.49 |
| Sensitivity | 83.1 dB |
| Linear excursion | ± 25 mm |
| Program Power | 3000 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 83.1dB
Thiele & Small parameters
- Resonance frequency (free air) fS 42.6Hz
- Mechanical quality factor QMS 3.99
- Electrical quality factor QES 0.56
- Total quality factor QTS 0.49
Large signal parameters
- Maximum linear excursion xmax 25mm
- Air volume displaced at xmax VD 911cm³
- Power handling P 1500W
- Program power Pmax 3000W
Voice Coil
- Nominal impedance Z 2 x 4Ω
- DC resistance (in series) RE 6.4Ω
- Inductance (1kHz, in series, estimated) LE 6.17mH
- VC Diameter 76.2mm
- Former material Anodized aluminum
Magnet
- Force factor (in series) Bl 29.9N/A
- Motor constant Bl/√RE 11.8N/√W
Diaphragm
- Effective diameter 215mm
- Effective area SD 365cm²
- Moving mass MMS 289g
- Moving mass (without air load) MMD 284g
- Material Non-Pressed paper
Suspensions
- Stiffness KMS 20.8N/mm
- Compliance CMS 48µm/N
- Equivalent volume to the compliance VAS 9.05L
- Mechanical resistance RMS 19.4N·s/m
- Surround material Foam
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 279mm
- Baffle cutout diameter 239mm
- Mounting depth 202mm
- Volume occupied by the driver (estimated) 1.9L
- Frame material Aluminium
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.png.webp)