Dayton Audio DA135-8

Woofer

Nominal diameter5.25″ / 135 mm
Resonance56.5 Hz
Q factor0.54
Sensitivity84.7 dB
Linear excursion± 3 mm
Program Power60 W
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
Discard
Apply
  • Sensitivity (1W, 1m, infinite baffle) SPL1W 84.7dB
  • Frequency response 50 - 15000Hz

Thiele & Small parameters

  • Resonance frequency (free air) fS 56.5Hz
  • Mechanical quality factor QMS 2.61
  • Electrical quality factor QES 0.68
  • Total quality factor QTS 0.54

Large signal parameters

  • Maximum linear excursion xmax 3mm
  • Air volume displaced at xmax VD 23cm³
  • Power handling P 30W
  • Program power Pmax 60W

Voice Coil

  • Nominal impedance Z 8Ω
  • DC resistance RE 6.4Ω
  • Inductance (1kHz) LE 0.97mH
  • VC Diameter 25mm
  • Winding material Copper
  • Former material Aluminum

Magnet

  • Force factor Bl 5.32N/A
  • Motor constant Bl/√RE 2.1N/√W
  • Material Ferrite

Diaphragm

  • Effective diameter 98mm
  • Effective area SD 75.4cm²
  • Moving mass MMS 8.54g
  • Moving mass (without air load) MMD 8g
  • Material Aluminum

Suspensions

  • Stiffness KMS 1.08N/mm
  • Compliance CMS 930µm/N
  • Equivalent volume to the compliance VAS 7.4L
  • Mechanical resistance RMS 1.16N·s/m
  • Surround material Rubber

Dimensions

  • Nominal diameter 5.25
  • 135mm
  • Overall diameter 135mm
  • Baffle cutout diameter 112mm
  • Overall depth 63mm
  • Volume occupied by the driver (estimated) 0.26L
  • Frame material Steel
Dayton Audio DA135-8 Impedance
Dayton Audio DA135-8 SPL
Dayton Audio DA135-8 Dimensions

Similar woofers to Dayton Audio DA135-8

Morel HYBRID MW 5 Woofer

Morel HYBRID MW 5

4 Ω
5 Woofer
fS56 Hz
SD90 cm²
45 - 3000 Hz
QTS0.45
xmax3.5 mm
SPL1W86 dB
Bl/√RE2.42
Pmax240 W
Dayton Audio DC130AS-8 Woofer

Dayton Audio DC130AS-8

8 Ω
5.25 Woofer
fS57.2 Hz
SD91.6 cm²
55 - 4000 Hz
QTS0.45
xmax2.5 mm
SPL1W86.4 dB
Bl/√RE2.46
Pmax60 W