Dayton Audio Classic DCS255-4
4Ω
Subwoofer
Nominal diameter | 10″ / 258 mm |
Resonance | 37.7 Hz |
Q factor | 0.46 |
Sensitivity | 87.4 dB |
Linear excursion | ± 8.3 mm |
Program Power | 400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.4dB
- Frequency response 31 - 200Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 37.7Hz
- Mechanical quality factor QMS 7.42
- Electrical quality factor QES 0.50
- Total quality factor QTS 0.46
Large signal parameters
- Maximum linear excursion xmax 8.3mm
- Air volume displaced at xmax VD 288cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.5Ω
- Inductance (1kHz) LE 1.8mH
- VC Diameter 49.5mm
- Winding material Copper
- Former material Kapton® / Polyimide
Magnet
- Force factor Bl 12.6N/A
- Motor constant Bl/√RE 6.78N/√W
- Material Ferrite
Diaphragm
- Effective diameter 210mm
- Effective area SD 346cm²
- Moving mass MMS 95.5g
- Moving mass (without air load) MMD 90.8g
- Material Paper / Kevlar
Suspensions
- Stiffness KMS 5.26N/mm
- Compliance CMS 190µm/N
- Equivalent volume to the compliance VAS 32.1L
- Mechanical resistance RMS 3.05N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 10″
- 258mm
- Overall diameter 258mm
- Baffle cutout diameter 232mm
- Overall depth 141mm
- Volume occupied by the driver (estimated) 1.8L
- Frame material Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





