Dayton Audio PA380-8
8Ω
Woofer
Nominal diameter | 15″ / 380 mm |
Resonance | 31.6 Hz |
Q factor | 0.27 |
Sensitivity | 94.3 dB |
Linear excursion | ± 5 mm |
Program Power | 1000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.3dB
- Frequency response 28 - 3500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 31.6Hz
- Mechanical quality factor QMS 12.20
- Electrical quality factor QES 0.27
- Total quality factor QTS 0.27
Large signal parameters
- Maximum linear excursion xmax 5mm
- Air volume displaced at xmax VD 423cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.3Ω
- Inductance (1kHz) LE 4.12mH
- VC Diameter 76mm
- Winding material Copper
- Former material Kapton® / Polyimide
Magnet
- Force factor Bl 25.8N/A
- Motor constant Bl/√RE 10.3N/√W
- Weight 2.268kg
- Material Ferrite
Diaphragm
- Effective diameter 328mm
- Effective area SD 845cm²
- Moving mass MMS 147g
- Moving mass (without air load) MMD 130g
- Material Paper / Carbon Fiber
Suspensions
- Stiffness KMS 5.88N/mm
- Compliance CMS 170µm/N
- Equivalent volume to the compliance VAS 175L
- Mechanical resistance RMS 2.39N·s/m
- Surround material Cloth
Dimensions
- Nominal diameter 15″
- 380mm
- Overall diameter 380mm
- Baffle cutout diameter 355mm
- Overall depth 163mm
- Volume occupied by the driver (estimated) 3.8L
- Frame material Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





