Fane COLOSSUS 15XB
8Ω
Subwoofer
| Nominal diameter | 15″ / 381 mm |
| Resonance | 38 Hz |
| Q factor | 0.32 |
| Sensitivity | 95.6 dB |
| Linear excursion | ± 7.5 mm |
| Program Power | 1600 W |
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.6dB
- Frequency response 40 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 38Hz
- Mechanical quality factor QMS 7.48
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion (one way) xmax 7.5mm
- Air volume displaced at xmax VD 642cm³
- Power handling P 800W
- Program power Pmax 1600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.2Ω
- Inductance (1kHz) LE 1.5mH
- VC Diameter 101.6mm
- Winding height HVC 22.9mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.1T
- Force factor Bl 22.1N/A
- Motor constant Bl/√RE 8.87N/√W
- Air gap height HAG 9.9mm
- Weight 3.402kg
- Material Ferrite
Diaphragm
- Effective diameter 331mm
- Effective area SD 855cm²
- Moving mass MMS 108g
- Moving mass (without air load) MMD 89.9g
- Material Polycellulose
Suspensions
- Stiffness KMS 6.17N/mm
- Compliance CMS 162µm/N
- Equivalent volume to the compliance VAS 168L
- Mechanical resistance RMS 3.45N·s/m
- Surround material Polyvinyl damped Poly Cotton
Dimensions
- Nominal diameter 15″
- 381mm
- Overall diameter 406mm
- Baffle cutout diameter 356mm
- Overall depth 181mm
- Flange thickness 8mm
- Mounting depth 173mm
- Volume occupied by the driver (estimated) 5.8L
- Net weight 12.4kg
- Frame material Die-cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.webp.webp)
.jpg.webp)