Fane IMPERIUM 18XL
8Ω
Subwoofer
Nominal diameter | 18″ / 457 mm |
Resonance | 36 Hz |
Q factor | 0.53 |
Sensitivity | 93.8 dB |
Linear excursion | ± 10.5 mm |
Program Power | 2600 W |
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.8dB
- Frequency response 30 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 36Hz
- Mechanical quality factor QMS 11.10
- Electrical quality factor QES 0.56
- Total quality factor QTS 0.53
Large signal parameters
- Maximum linear excursion xmax 10.5mm
- Air volume displaced at xmax VD 1191cm³
- Power handling P 1300W
- Program power Pmax 2600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.9Ω
- Inductance (1kHz) LE 2.9mH
- VC Diameter 127mm
- Winding height HVC 25mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 0.98T
- Force factor Bl 20.4N/A
- Motor constant Bl/√RE 8.38N/√W
- Air gap height HAG 9mm
- Weight 2.999kg
- Material Ferrite
Diaphragm
- Effective diameter 398mm
- Effective area SD 1134cm²
- Moving mass MMS 174g
- Moving mass (without air load) MMD 146g
- Material Paper
Suspensions
- Stiffness KMS 9.09N/mm
- Compliance CMS 110µm/N
- Equivalent volume to the compliance VAS 205L
- Mechanical resistance RMS 3.55N·s/m
- Surround material Polyvinyl damped Poly Cotton
Dimensions
- Nominal diameter 18″
- 457mm
- Overall diameter 485mm
- Baffle cutout diameter 415mm
- Overall depth 202mm
- Flange thickness 12mm
- Mounting depth 190mm
- Volume occupied by the driver (estimated) 7.3L
- Net weight 13.09kg
- Frame material Die-cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





