Fane SOVEREIGN 6-100
8Ω
Mid Bass
| Nominal diameter | 6″ / 152 mm |
| Resonance | 115 Hz |
| Q factor | 0.64 |
| Sensitivity | 89.3 dB |
| Linear excursion | ± 2.5 mm |
| Program Power | 200 W |
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89.3dB
- Frequency response 60 - 7000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 115Hz
- Mechanical quality factor QMS 12.80
- Electrical quality factor QES 0.67
- Total quality factor QTS 0.64
Large signal parameters
- Maximum linear excursion (one way) xmax 2.5mm
- Air volume displaced at xmax VD 35cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.9Ω
- Inductance (1kHz) LE 1.15mH
- VC Diameter 38.1mm
- Winding height HVC 10mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1T
- Force factor Bl 13.3N/A
- Motor constant Bl/√RE 5.04N/√W
- Air gap height HAG 6mm
- Weight 0.567kg
- Material Ferrite
Diaphragm
- Effective diameter 131mm
- Effective area SD 139cm²
- Moving mass MMS 23.9g
- Moving mass (without air load) MMD 22.7g
- Material Paper
Suspensions
- Stiffness KMS 12.5N/mm
- Compliance CMS 80µm/N
- Equivalent volume to the compliance VAS 2.2L
- Mechanical resistance RMS 1.35N·s/m
- Surround material Polyvinyl damped Linen
Dimensions
- Nominal diameter 6″
- 152mm
- Overall diameter 165mm
- Baffle cutout diameter 147mm
- Overall depth 83mm
- Flange thickness 7mm
- Mounting depth 76mm
- Volume occupied by the driver (estimated) 0.54L
- Net weight 1.65kg
- Frame material Pressed Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.png.webp)
.jpg.webp)