Fane SOVEREIGN PRO 10M
8Ω
Mid-range
| Nominal diameter | 10″ / 254 mm |
| Resonance | 56 Hz |
| Q factor | 0.27 |
| Sensitivity | 95 dB |
| Linear excursion | ± 2 mm |
| Program Power | 600 W |
Discontinued
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95dB
- Frequency response 200 - 3500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 56Hz
- Mechanical quality factor QMS 4.90
- Electrical quality factor QES 0.29
- Total quality factor QTS 0.27
Large signal parameters
- Maximum linear excursion (one way) xmax 2mm
- Air volume displaced at xmax VD 68cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 1.45mH
- VC Diameter 63.5mm
- Winding height HVC 12mm
- Winding material Aluminium
- Former material Glass Fibre
Magnet
- Flux density B 1.24T
- Force factor Bl 15.8N/A
- Motor constant Bl/√RE 6.68N/√W
- Air gap height HAG 8mm
- Weight 2.211kg
- Material Ferrite
Diaphragm
- Effective diameter 208mm
- Effective area SD 340cm²
- Moving mass MMS 35g
- Moving mass (without air load) MMD 30.1g
- Material Paper
Suspensions
- Stiffness KMS 4.33N/mm
- Compliance CMS 231µm/N
- Equivalent volume to the compliance VAS 37L
- Mechanical resistance RMS 2.51N·s/m
- Surround material Polyvinyl damped Linen
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 283mm
- Baffle cutout diameter 228mm
- Overall depth 110mm
- Flange thickness 8mm
- Mounting depth 102mm
- Volume occupied by the driver (estimated) 2.1L
- Net weight 6.05kg
- Frame material Die-cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)