Hertz Mille ML 2500.3 LEGEND
4Ω
Subwoofer
Nominal diameter | 10″ / 250 mm |
Resonance | 33 Hz |
Q factor | 0.63 |
Sensitivity | 83.7 dB |
Linear excursion | ± 17 mm |
Program Power | 1400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 83.7dB
- Frequency response 27 - 500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 33Hz
- Mechanical quality factor QMS 7.50
- Electrical quality factor QES 0.65
- Total quality factor QTS 0.63
Large signal parameters
- Maximum linear excursion xmax 17mm
- Maximum excursion before damage xlim 27mm
- Air volume displaced at xmax VD 619cm³
- Power handling P 700W
- Program power Pmax 1400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 2.8Ω
- Inductance (1kHz) LE 1.05mH
- VC Diameter 100mm
Magnet
- Force factor Bl 12.6N/A
- Motor constant Bl/√RE 7.6N/√W
- Diameter 95mm
- Height 6mm
- Material Neodymium
Diaphragm
- Effective diameter 213mm
- Effective area SD 364cm²
- Moving mass MMS 175g
- Moving mass (without air load) MMD 170g
- Material Pressed-pulp cone with mineral powders
Suspensions
- Stiffness KMS 8N/mm
- Compliance CMS 125µm/N
- Equivalent volume to the compliance VAS 23.5L
- Mechanical resistance RMS 4.84N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 268mm
- Baffle cutout diameter 234mm
- Overall depth 159mm
- Flange thickness 22mm
- Mounting depth 137mm
- Volume occupied by the driver (estimated) 3L
- Net weight 7.5kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





