KICKER CompVT 43CVT102

2Ω
4Ω

Subwoofer

Nominal diameter10″ / 250 mm
Resonance39.2 Hz
Q factor0.57
Sensitivity86.4 dB
Linear excursion± 13 mm
Program Power700 W
Discontinued
KICKER 43CVT102 SubwooferKICKER 43CVT102 SubwooferKICKER 43CVT102 Subwoofer
Excursion
Velocity
SPL
Phase
Group delay
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
Discard
Apply

Specifications

  • Sensitivity (1W, 1m, infinite baffle) SPL1W 86.4dB

Thiele & Small parameters

  • Resonance frequency (free air) fS 39.2Hz
  • Mechanical quality factor QMS 9.02
  • Electrical quality factor QES 0.61
  • Total quality factor QTS 0.57

Large signal parameters

  • Maximum linear excursion (one way) xmax 13mm
  • Air volume displaced at xmax VD 476cm³
  • Power handling P 350W
  • Program power Pmax 700W

Voice Coil

  • Nominal impedance Z 2Ω
  • DC resistance RE 2.2Ω
  • Inductance (1kHz) LE 1.89mH

Magnet

  • Force factor Bl 10.7N/A
  • Motor constant Bl/√RE 7.19N/√W

Diaphragm

  • Effective diameter 216mm
  • Effective area SD 366cm²
  • Moving mass MMS 128g
  • Moving mass (without air load) MMD 123g

Suspensions

  • Stiffness KMS 7.75N/mm
  • Compliance CMS 129µm/N
  • Equivalent volume to the compliance VAS 24.5L
  • Mechanical resistance RMS 3.5N·s/m

Dimensions

  • Nominal diameter 10″
  • 250mm
  • Baffle cutout diameter 233mm
  • Mounting depth 108mm
  • Volume occupied by the driver (estimated) 1.5L
Impedance
Step response
Tone Burst
KICKER 43CVT102 Dimensions
PDF fileDatasheet

Export this driver to a simulation software:

Closed Box Simulator·Speakerbench logoSpeakerbenchWinISD logoWinISDBasta! logoBasta!Hornresp logoHornrespQSpeakers logoQSpeakersSpeakerSim logoSpeakerSimMfbLabs logoMfbLabsAmplion logoAmplion

Similar subwoofers to KICKER 43CVT102

Pioneer TS-D10D2 Subwoofer

Pioneer TS-D10D2

2 x 2 Ω
10″ Subwoofer
fS40 Hz
SD350 cm²
20 - 6600 Hz
QTS0.70
xmax9.8 mm
SPL1W85.5 dB
Bl/√RE6.89
Pmax1000 W