LaVoce MAF103.00
8Ω
Mid-range
| Nominal diameter | 10″ / 250 mm |
| Resonance | 85 Hz |
| Q factor | 0.25 |
| Sensitivity | 96.8 dB |
| Linear excursion | ± 2.2 mm |
| Program Power | 700 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.8dB
- Frequency response 70 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 85Hz
- Mechanical quality factor QMS 5.77
- Electrical quality factor QES 0.27
- Total quality factor QTS 0.25
Large signal parameters
- Maximum linear excursion xmax 2.2mm
- Maximum excursion before damage xlim 6.2mm
- Air volume displaced at xmax VD 77cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.58mH
- VC Diameter 75mm
- Winding height HVC 8.3mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 20.6N/A
- Motor constant Bl/√RE 9.04N/√W
- Air gap height HAG 8mm
- Diameter 200mm
- Height 20mm
- Material Ferrite
Diaphragm
- Effective diameter 211mm
- Effective area SD 350cm²
- Moving mass MMS 41g
- Moving mass (without air load) MMD 36.4g
- Material Water Resistant Treated Paper
Suspensions
- Stiffness KMS 11.6N/mm
- Compliance CMS 86µm/N
- Equivalent volume to the compliance VAS 14.9L
- Mechanical resistance RMS 3.79N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 10″
- 250mm
- Volume occupied by the driver 1.8L
- Net weight 6.9kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.jpg.webp)
.jpg.webp)