LaVoce SSF102.40
8Ω
Subwoofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 39 Hz |
| Q factor | 0.57 |
| Sensitivity | 87.7 dB |
| Linear excursion | ± 8.3 mm |
| Program Power | 500 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.7dB
- Frequency response 40 - 500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 39Hz
- Mechanical quality factor QMS 8.96
- Electrical quality factor QES 0.61
- Total quality factor QTS 0.57
Large signal parameters
- Maximum linear excursion xmax 8.3mm
- Maximum excursion before damage xlim 12.3mm
- Air volume displaced at xmax VD 291cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.7Ω
- Inductance (1kHz) LE 2.42mH
- VC Diameter 61mm
- Winding height HVC 20.5mm
- Winding material Copper Clad Aluminium
- Former material Glass Fiber
Magnet
- Force factor Bl 14N/A
- Motor constant Bl/√RE 5.41N/√W
- Air gap height HAG 8mm
- Diameter 140mm
- Height 20mm
- Material Ferrite
Diaphragm
- Effective diameter 211mm
- Effective area SD 350cm²
- Moving mass MMS 73.4g
- Moving mass (without air load) MMD 68.8g
- Material Water Resistant Treated Paper
Suspensions
- Stiffness KMS 4.39N/mm
- Compliance CMS 228µm/N
- Equivalent volume to the compliance VAS 39.5L
- Mechanical resistance RMS 2.01N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 10″
- 250mm
- Volume occupied by the driver 1.5L
- Net weight 3.5kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.png.webp)
.png.webp)