LaVoce SSN153.00
8Ω
Subwoofer
| Nominal diameter | 15″ / 380 mm |
| Resonance | 51 Hz |
| Q factor | 0.47 |
| Sensitivity | 95.1 dB |
| Linear excursion | ± 6.7 mm |
| Program Power | 800 W |
Discontinued
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.1dB
- Frequency response 50 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 51Hz
- Mechanical quality factor QMS 8.09
- Electrical quality factor QES 0.49
- Total quality factor QTS 0.47
Large signal parameters
- Maximum linear excursion xmax 6.7mm
- Maximum excursion before damage xlim 12.6mm
- Air volume displaced at xmax VD 573cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.1Ω
- Inductance (1kHz) LE 0.99mH
- VC Diameter 75mm
- Winding height HVC 18.6mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 19.2N/A
- Motor constant Bl/√RE 8.5N/√W
- Air gap height HAG 10.5mm
- Diameter 74mm
- Height 9mm
- Material Neodymium
Diaphragm
- Effective diameter 330mm
- Effective area SD 855cm²
- Moving mass MMS 112g
- Moving mass (without air load) MMD 94.9g
- Material Water Resistant Treated Paper + Water Proof Front Side Treatment
Suspensions
- Stiffness KMS 11.4N/mm
- Compliance CMS 88µm/N
- Equivalent volume to the compliance VAS 91L
- Mechanical resistance RMS 4.44N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 15″
- 380mm
- Volume occupied by the driver 4.6L
- Net weight 3.5kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)