LaVoce WAF102.51
8Ω
Woofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 70 Hz |
| Q factor | 0.42 |
| Sensitivity | 93.6 dB |
| Linear excursion | ± 6 mm |
| Program Power | 700 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.6dB
- Frequency response 70 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 70Hz
- Mechanical quality factor QMS 7.16
- Electrical quality factor QES 0.44
- Total quality factor QTS 0.42
Large signal parameters
- Maximum linear excursion xmax 6mm
- Maximum excursion before damage xlim 11.5mm
- Air volume displaced at xmax VD 208cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.7Ω
- Inductance (1kHz) LE 0.9mH
- VC Diameter 65mm
- Winding height HVC 16.9mm
- Winding material Copper Clad Aluminium
- Former material Glass Fiber
Magnet
- Force factor Bl 15.6N/A
- Motor constant Bl/√RE 6.53N/√W
- Air gap height HAG 10mm
- Diameter 156mm
- Height 20mm
- Material Ferrite
Diaphragm
- Effective diameter 211mm
- Effective area SD 350cm²
- Moving mass MMS 42.5g
- Moving mass (without air load) MMD 37.9g
- Material Water Resistant Treated Paper + Water Proof Front Side Treatment
Suspensions
- Stiffness KMS 8.33N/mm
- Compliance CMS 120µm/N
- Equivalent volume to the compliance VAS 21.4L
- Mechanical resistance RMS 2.61N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 10″
- 250mm
- Volume occupied by the driver 1.6L
- Net weight 4.8kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)