LaVoce WAN082.02
8Ω
Woofer
Nominal diameter | 8″ / 200 mm |
Resonance | 80 Hz |
Q factor | 0.23 |
Sensitivity | 95.3 dB |
Linear excursion | ± 5.8 mm |
Program Power | 400 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.3dB
- Frequency response 80 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 80Hz
- Mechanical quality factor QMS 4.88
- Electrical quality factor QES 0.25
- Total quality factor QTS 0.23
Large signal parameters
- Maximum linear excursion xmax 5.8mm
- Maximum excursion before damage xlim 11.3mm
- Air volume displaced at xmax VD 128cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.02mH
- VC Diameter 51mm
- Winding height HVC 16.6mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 17.8N/A
- Motor constant Bl/√RE 7.79N/√W
- Air gap height HAG 10mm
- Diameter 110mm
- Height 8mm
- Material Neodymium
Diaphragm
- Effective diameter 167mm
- Effective area SD 220cm²
- Moving mass MMS 29.9g
- Moving mass (without air load) MMD 27.6g
- Material Water Resistant Treated Paper + Water Proof Front Side Treatment
Suspensions
- Stiffness KMS 7.63N/mm
- Compliance CMS 131µm/N
- Equivalent volume to the compliance VAS 8.97L
- Mechanical resistance RMS 3.08N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 8″
- 200mm
- Volume occupied by the driver 0.65L
- Net weight 2.7kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





