LaVoce WSF061.52
8Ω
Woofer
| Nominal diameter | 6.5″ / 165 mm |
| Resonance | 91 Hz |
| Q factor | 0.34 |
| Sensitivity | 93 dB |
| Linear excursion | ± 3.8 mm |
| Program Power | 250 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93dB
- Frequency response 90 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 91Hz
- Mechanical quality factor QMS 5.42
- Electrical quality factor QES 0.36
- Total quality factor QTS 0.34
Large signal parameters
- Maximum linear excursion xmax 3.8mm
- Maximum excursion before damage xlim 6.3mm
- Air volume displaced at xmax VD 54cm³
- Power handling P 125W
- Program power Pmax 250W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz) LE 0.42mH
- VC Diameter 38mm
- Winding height HVC 10.6mm
- Winding material Copper
- Former material Polyimide
Magnet
- Force factor Bl 10.8N/A
- Motor constant Bl/√RE 4.61N/√W
- Air gap height HAG 6mm
- Diameter 115mm
- Height 20mm
- Material Ferrite
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 13.3g
- Moving mass (without air load) MMD 12.1g
- Material Water Resistant Treated Paper
Suspensions
- Stiffness KMS 4.37N/mm
- Compliance CMS 229µm/N
- Equivalent volume to the compliance VAS 6.62L
- Mechanical resistance RMS 1.4N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 6.5″
- 165mm
- Volume occupied by the driver 0.5L
- Net weight 2.0kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)