MONACOR SPH-135/AD
8Ω
Mid-range
| Nominal diameter | 5.5″ / 135x135 mm |
| Resonance | 39 Hz |
| Q factor | 0.37 |
| Sensitivity | 87.4 dB |
| Linear excursion | ± 1.8 mm |
| Program power | 60 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.4dB
- Frequency response 39 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 39Hz
- Mechanical quality factor QMS 3.40
- Electrical quality factor QES 0.42
- Total quality factor QTS 0.37
Large signal parameters
- Maximum linear excursion (one way) xmax 1.8mm
- Air volume displaced at xmax VD 17cm³
- Power handling P 40W
- Program power Pmax 60W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz) LE 0.47mH
- VC Diameter 25.5mm
- Winding material Kapton
Magnet
- Force factor Bl 5N/A
- Motor constant Bl/√RE 2.13N/√W
- Diameter 100mm
- Weight 0.38kg
Diaphragm
- Effective diameter 110mm
- Effective area SD 95cm²
- Moving mass (including air load) MMS 7.8g
- Moving mass MMD 7.1g
Suspensions
- Stiffness KMS 0.467N/mm
- Compliance CMS 2140µm/N
- Equivalent volume to the compliance VAS 26L
- Mechanical resistance RMS 0.56N·s/m
Dimensions
- Nominal diameter 5.5″
- 135 x 135mm
- Overall size 135 x 135mm
- Baffle cutout diameter 121mm
- Overall depth 70mm
- Flange thickness 6mm
- Mounting depth 64mm
- Volume occupied by the driver (estimated) 0.33L
- Net weight 1.1kg
.png)
.png)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.png.webp)
.jpg.webp)
.jpg.webp)