Oberton 12NB600
8Ω
Woofer
| Nominal diameter | 12″ / 315 mm |
| Resonance | 50.9 Hz |
| Q factor | 0.19 |
| Sensitivity | 95.1 dB |
| Linear excursion | ± 7.5 mm |
| Program Power | 1200 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.1dB
- Frequency response 50 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 50.9Hz
- Mechanical quality factor QMS 6.97
- Electrical quality factor QES 0.20
- Total quality factor QTS 0.19
Large signal parameters
- Maximum linear excursion (one way) xmax 7.5mm
- Air volume displaced at xmax VD 386cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.0Ω
- Inductance (1kHz) LE 1.82mH
- VC Diameter 100mm
- Winding height HVC 22mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Flux density B 1.02T
- Force factor Bl 28.4N/A
- Motor constant Bl/√RE 12.8N/√W
- Air gap height HAG 14mm
- Material Neodymium
Diaphragm
- Effective diameter 256mm
- Effective area SD 515cm²
- Moving mass MMS 102g
- Moving mass (without air load) MMD 93.1g
- Material Kevlar paper
Suspensions
- Stiffness KMS 10.4N/mm
- Compliance CMS 96µm/N
- Equivalent volume to the compliance VAS 35.7L
- Mechanical resistance RMS 4.66N·s/m
Dimensions
- Nominal diameter 12″
- 315mm
- Overall diameter 315mm
- Baffle cutout diameter 280mm
- Overall depth 185mm
- Volume occupied by the driver (estimated) 3.7L
- Net weight 7.8kg
- Frame material Die Cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.png.webp)
.png.webp)
.jpg.webp)