PRV Audio 69MR500-4 BULLET
4Ω
Mid-range
Nominal size | 6x9″ / 152x228 mm |
Resonance | 149 Hz |
Q factor | 1.12 |
Sensitivity | 95.2 dB |
Linear excursion | ± 3.3 mm |
Program Power | 500 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.2dB
- Frequency response 150 - 12500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 149Hz
- Mechanical quality factor QMS 16.80
- Electrical quality factor QES 1.20
- Total quality factor QTS 1.12
Large signal parameters
- Maximum linear excursion xmax 3.3mm
- Air volume displaced at xmax VD 70cm³
- Power handling P 250W
- Program power Pmax 500W
- Peak power Ppeak 1000W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.3Ω
- Inductance (1kHz) LE 0.13mH
- VC Diameter 38mm
- Winding height HVC 9.5mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 5.86N/A
- Motor constant Bl/√RE 3.23N/√W
- Air gap height HAG 6mm
Diaphragm
- Effective diameter 166mm
- Effective area SD 216cm²
- Moving mass MMS 13.1g
- Moving mass (without air load) MMD 11.3g
Suspensions
- Stiffness KMS 12.5N/mm
- Compliance CMS 80µm/N
- Equivalent volume to the compliance VAS 5.21L
- Mechanical resistance RMS 0.73N·s/m
Dimensions
- Nominal size 6 x 9″
- 152 x 228mm
- Overall size 164 x 236mm
- Mounting baffle cutout 150 x 219mm
- Overall depth 98mm
- Flange thickness 9mm
- Mounting depth 89mm
- Volume occupied by the driver (estimated) 0.68L
- Net weight 2.0kg
- Frame material Stamped Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





