PRV Audio RS65-SUBD4
2x4Ω
Subwoofer
Nominal diameter | 6.5″ / 165 mm |
Resonance | 64.5 Hz |
Q factor | 0.58 |
Sensitivity | 82 dB |
Linear excursion | ± 8.8 mm |
Program Power | 300 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 82dB
Thiele & Small parameters
- Resonance frequency (free air) fS 64.5Hz
- Mechanical quality factor QMS 5.00
- Electrical quality factor QES 0.66
- Total quality factor QTS 0.58
Large signal parameters
- Maximum linear excursion xmax 8.8mm
- Air volume displaced at xmax VD 108cm³
- Power handling P 150W
- Program power Pmax 300W
- Peak power Ppeak 600W
Voice Coil
- Nominal impedance Z 2 x 4Ω
- DC resistance (in series) RE 6.8Ω
- Inductance (1kHz, in series) LE 3.8mH
- VC Diameter 50mm
- Winding height HVC 21mm
- Winding material Copper
- Former material Black Aluminum
Magnet
- Force factor (in series) Bl 16N/A
- Motor constant Bl/√RE 6.12N/√W
- Air gap height HAG 8mm
Diaphragm
- Effective diameter 125mm
- Effective area SD 123cm²
- Moving mass MMS 61.8g
- Moving mass (without air load) MMD 60.7g
Suspensions
- Stiffness KMS 11.1N/mm
- Compliance CMS 90µm/N
- Equivalent volume to the compliance VAS 2.07L
- Mechanical resistance RMS 5.01N·s/m
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 173mm
- Baffle cutout diameter 145mm
- Overall depth 102mm
- Flange thickness 14mm
- Mounting depth 88mm
- Volume occupied by the driver (estimated) 1L
- Net weight 3.3kg
- Frame material Stamped Steel
.png)
Export this driver to a simulation software:
Closed Box Simulator·





