Pioneer TS-W261S4
2x4Ω
4Ω
Subwoofer
Nominal diameter | 10″ / 250 mm |
Resonance | 45 Hz |
Q factor | 0.85 |
Sensitivity | 86.4 dB |
Linear excursion | ± 9.3 mm |
Program Power | 700 W |
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.4dB
- Frequency response 20 - 125Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 45Hz
- Mechanical quality factor QMS 14.59
- Electrical quality factor QES 0.90
- Total quality factor QTS 0.85
Large signal parameters
- Maximum linear excursion xmax 9.3mm
- Air volume displaced at xmax VD 326cm³
- Power handling P 350W
- Program power Pmax 700W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.2Ω
- Inductance (1kHz) LE 2.92mH
- VC Diameter 40mm
- Winding height HVC 28.6mm
- Winding material Copper
Magnet
- Flux density B 0.681T
- Force factor Bl 11.5N/A
- Motor constant Bl/√RE 6.43N/√W
- Air gap height HAG 10mm
- Weight 1.7kg
- Material Ferrite
Diaphragm
- Effective diameter 211mm
- Effective area SD 350cm²
- Moving mass MMS 124g
- Moving mass (without air load) MMD 119g
- Material IMPP
Suspensions
- Stiffness KMS 10.1N/mm
- Compliance CMS 99µm/N
- Equivalent volume to the compliance VAS 18.6L
- Mechanical resistance RMS 2.42N·s/m
- Surround material Fiber Reinforced Elastic Polymer
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 277mm
- Baffle cutout diameter 235mm
- Overall depth 155mm
- Flange thickness 16mm
- Mounting depth 139mm
- Volume occupied by the driver 1.22L
- Net weight 4.75kg
Export this driver to a simulation software:
Closed Box Simulator·





