PowerBass PBX1-10D2
2x2Ω
2x4ΩSubwoofer
| Nominal diameter | 10″ / 254 mm |
| Resonance | 33.1 Hz |
| Q factor | 0.98 |
| Sensitivity | 83.8 dB |
| Linear excursion | ± 14.9 mm |
| Program power | 900 W |
.webp)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 83.8dB
- Frequency response 28 - 350Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 33.1Hz
- Mechanical quality factor QMS 6.28
- Electrical quality factor QES 1.16
- Total quality factor QTS 0.98
Large signal parameters
- Maximum linear excursion (one way) xmax 14.9mm
- Air volume displaced at xmax VD 566cm³
- Power handling P 450W
- Program power Pmax 900W
- Peak power Ppeak 900W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.2Ω
- Inductance (1kHz, in series, estimated) LE 2.3mH
- VC Diameter 50.8mm
- Former material BASV
Magnet
- Force factor (in series) Bl 13.9N/A
- Motor constant Bl/√RE 5.52N/√W
Diaphragm
- Effective diameter 220mm
- Effective area SD 380cm²
- Moving mass (including air load) MMS 190g
- Moving mass MMD 185g
- Material Poly/Mica
Suspensions
- Stiffness KMS 8.2N/mm
- Compliance CMS 122µm/N
- Equivalent volume to the compliance VAS 24.9L
- Mechanical resistance RMS 6.29N·s/m
- Surround material Santoprene
- Spider material Hybrid Progressive
Dimensions
- Nominal diameter 10″
- 254mm
- Mounting depth 140mm
- Volume occupied by the driver 2.66L
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.png.webp)
.jpg.webp)
.webp.webp)