Celestion TN1020
8Ω
Mid Bass
| Nominal diameter | 10″ / 254 mm |
| Resonance | 95 Hz |
| Q factor | 0.40 |
| Sensitivity | 96.2 dB |
| Linear excursion | ± 2 mm |
| Program Power | 300 W |
Discontinued
.png)
.png)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.2dB
- Frequency response 65 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 95Hz
- Mechanical quality factor QMS 3.16
- Electrical quality factor QES 0.45
- Total quality factor QTS 0.40
Large signal parameters
- Maximum linear excursion xmax 2mm
- Air volume displaced at xmax VD 69cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.6mH
- VC Diameter 50mm
- Winding height HVC 12mm
- Winding material Round copper
- Former material Polyimide
Magnet
- Force factor Bl 14.9N/A
- Motor constant Bl/√RE 6.29N/√W
- Air gap height HAG 8mm
- Material Neodymium
Diaphragm
- Effective diameter 210mm
- Effective area SD 346cm²
- Moving mass MMS 29.9g
- Moving mass (without air load) MMD 25.2g
- Material Kevlar loaded paper
Suspensions
- Stiffness KMS 11.1N/mm
- Compliance CMS 90µm/N
- Equivalent volume to the compliance VAS 16L
- Mechanical resistance RMS 5.63N·s/m
- Surround material Cloth-sealed
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 256mm
- Baffle cutout diameter 229mm
- Overall depth 110mm
- Volume occupied by the driver (estimated) 0.81L
- Net weight 1.5kg
- Frame material Pressed steel
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)