ESX QXE10D2
2x2Ω
Subwoofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 37.9 Hz |
| Q factor | 0.37 |
| Sensitivity | 85.1 dB |
| Linear excursion | ± 10 mm |
| Program Power | 1200 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 85.1dB
Thiele & Small parameters
- Resonance frequency (free air) fS 37.9Hz
- Mechanical quality factor QMS 5.07
- Electrical quality factor QES 0.39
- Total quality factor QTS 0.37
Large signal parameters
- Maximum linear excursion (one way) xmax 10mm
- Maximum excursion before damage xlim 18mm
- Air volume displaced at xmax VD 332cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.8Ω
- Inductance (1kHz, in series) LE 2.24mH
- VC Diameter 64mm
- Winding height HVC 36mm
- Former material Aluminium
Magnet
- Force factor (in series) Bl 21.9N/A
- Motor constant Bl/√RE 11.2N/√W
- Diameter 170mm
- Height 40mm
- Weight 3.572kg
Diaphragm
- Effective diameter 206mm
- Effective area SD 332cm²
- Moving mass MMS 196g
- Moving mass (without air load) MMD 191g
- Material Non-pressed Paper
Suspensions
- Stiffness KMS 11N/mm
- Compliance CMS 91µm/N
- Equivalent volume to the compliance VAS 14.2L
- Mechanical resistance RMS 9.21N·s/m
- Surround material Foam
- Spider material Dual Nomex
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 273mm
- Baffle cutout diameter 234mm
- Mounting depth 155mm
- Volume occupied by the driver (estimated) 4.8L
- Net weight 10.5kg
- Frame material Diecast Aluminium
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.png.webp)
.png.webp)