ESX SX1040
4Ω
Subwoofer
Nominal diameter | 10″ / 250 mm |
Resonance | 29 Hz |
Q factor | 0.32 |
Sensitivity | 87 dB |
Linear excursion | ± 8.5 mm |
Program Power | 800 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87dB
Thiele & Small parameters
- Resonance frequency (free air) fS 29Hz
- Mechanical quality factor QMS 5.30
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 8.5mm
- Maximum excursion before damage xlim 15mm
- Air volume displaced at xmax VD 282cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.2Ω
- Inductance (1kHz) LE 1.1mH
- VC Diameter 50mm
- Winding height HVC 25mm
- Former material Aluminium
Magnet
- Force factor Bl 13N/A
- Motor constant Bl/√RE 7.27N/√W
- Diameter 140mm
- Height 40mm
- Weight 2.268kg
Diaphragm
- Effective diameter 206mm
- Effective area SD 332cm²
- Moving mass MMS 99g
- Moving mass (without air load) MMD 94.5g
- Material Non-pressed Paper
Suspensions
- Stiffness KMS 3.32N/mm
- Compliance CMS 301µm/N
- Equivalent volume to the compliance VAS 47L
- Mechanical resistance RMS 3.4N·s/m
- Surround material Rubber
- Spider material Single Nomex
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 265mm
- Baffle cutout diameter 236mm
- Mounting depth 127mm
- Volume occupied by the driver (estimated) 3.1L
- Net weight 7.0kg
- Frame material Diecast Aluminium
Export this driver to a simulation software:
Closed Box Simulator·





