ESX SX840
4Ω
Subwoofer
Nominal diameter | 8″ / 200 mm |
Resonance | 35 Hz |
Q factor | 0.38 |
Sensitivity | 86 dB |
Linear excursion | ± 3.5 mm |
Program Power | 600 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86dB
Thiele & Small parameters
- Resonance frequency (free air) fS 35Hz
- Mechanical quality factor QMS 4.90
- Electrical quality factor QES 0.41
- Total quality factor QTS 0.38
Large signal parameters
- Maximum linear excursion xmax 3.5mm
- Maximum excursion before damage xlim 13mm
- Air volume displaced at xmax VD 75cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.2Ω
- Inductance (1kHz) LE 1.1mH
- VC Diameter 50mm
- Winding height HVC 15mm
- Former material Aluminium
Magnet
- Force factor Bl 9.5N/A
- Motor constant Bl/√RE 5.31N/√W
- Diameter 110mm
- Height 40mm
- Weight 1.361kg
Diaphragm
- Effective diameter 165mm
- Effective area SD 214cm²
- Moving mass MMS 53g
- Moving mass (without air load) MMD 50.6g
- Material Non-pressed Paper
Suspensions
- Stiffness KMS 2.6N/mm
- Compliance CMS 385µm/N
- Equivalent volume to the compliance VAS 25L
- Mechanical resistance RMS 2.38N·s/m
- Surround material Rubber
- Spider material Single Nomex
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 218mm
- Baffle cutout diameter 189mm
- Mounting depth 114mm
- Volume occupied by the driver (estimated) 2.1L
- Net weight 4.9kg
- Frame material Diecast Aluminium
Export this driver to a simulation software:
Closed Box Simulator·





