KICKER CompC 44CWCS124
2x4Ω
4Ω
Subwoofer
| Nominal diameter | 12″ / 300 mm |
| Resonance | 31.6 Hz |
| Q factor | 0.73 |
| Sensitivity | 87.5 dB |
| Linear excursion | ± 13.2 mm |
| Program Power | 600 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.5dB
- Frequency response 27 - 500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 31.6Hz
- Mechanical quality factor QMS 17.30
- Electrical quality factor QES 0.77
- Total quality factor QTS 0.73
Large signal parameters
- Maximum linear excursion xmax 13.2mm
- Air volume displaced at xmax VD 698cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.8Ω
- Inductance (1kHz) LE 2.58mH
Magnet
- Force factor Bl 11.5N/A
- Motor constant Bl/√RE 5.89N/√W
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 134g
- Moving mass (without air load) MMD 125g
Suspensions
- Stiffness KMS 5.27N/mm
- Compliance CMS 191µm/N
- Equivalent volume to the compliance VAS 75.9L
- Mechanical resistance RMS 1.53N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Baffle cutout diameter 279mm
- Mounting depth 136mm
- Volume occupied by the driver (estimated) 2.3L
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)