LaVoce WAN082.00
8Ω
Woofer
| Nominal diameter | 8″ / 200 mm |
| Resonance | 82 Hz |
| Q factor | 0.52 |
| Sensitivity | 92.2 dB |
| Linear excursion | ± 6.4 mm |
| Program Power | 400 W |
Discontinued
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.2dB
- Frequency response 80 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 82Hz
- Mechanical quality factor QMS 5.06
- Electrical quality factor QES 0.60
- Total quality factor QTS 0.52
Large signal parameters
- Maximum linear excursion xmax 6.4mm
- Maximum excursion before damage xlim 10.5mm
- Air volume displaced at xmax VD 145cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.26mH
- VC Diameter 51mm
- Winding height HVC 16.8mm
- Winding material Copper Clad Aluminium
- Former material Glass Fiber
Magnet
- Force factor Bl 10.3N/A
- Motor constant Bl/√RE 4.51N/√W
- Air gap height HAG 8.2mm
- Diameter 51mm
- Height 9mm
- Material Neodymium
Diaphragm
- Effective diameter 170mm
- Effective area SD 227cm²
- Moving mass MMS 23.4g
- Moving mass (without air load) MMD 21g
- Material Water Resistant Treated Paper
Suspensions
- Stiffness KMS 6.29N/mm
- Compliance CMS 159µm/N
- Equivalent volume to the compliance VAS 11.6L
- Mechanical resistance RMS 2.38N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 8″
- 200mm
- Volume occupied by the driver 0.6L
- Net weight 2.4kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.png.webp)
.jpg.webp)