Peerless FSL-1015R02-08
8Ω
Woofer
| Nominal diameter | 10″ / 254 mm |
| Resonance | 68 Hz |
| Q factor | 0.64 |
| Sensitivity | 93.2 dB |
| Linear excursion | ± 4.3 mm |
| Program Power | 200 W |
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.2dB
- Frequency response 50 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 68Hz
- Mechanical quality factor QMS 4.58
- Electrical quality factor QES 0.74
- Total quality factor QTS 0.64
Large signal parameters
- Maximum linear excursion xmax 4.3mm
- Air volume displaced at xmax VD 159cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 0.504mH
- VC Diameter 38.4mm
Magnet
- Force factor Bl 9.48N/A
- Motor constant Bl/√RE 4.12N/√W
- Air gap height HAG 6mm
- Material Ferrite
Diaphragm
- Effective diameter 217mm
- Effective area SD 370cm²
- Moving mass MMS 29.5g
- Moving mass (without air load) MMD 24.6g
- Material Paper
Suspensions
- Stiffness KMS 5.26N/mm
- Compliance CMS 190µm/N
- Equivalent volume to the compliance VAS 36L
- Mechanical resistance RMS 2.75N·s/m
- Surround material Fabric
Dimensions
- Nominal diameter 10″
- 254mm
- Volume occupied by the driver (estimated) 0.89L
- Net weight 2.15kg
- Frame material Pressed Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)