KICKER CompC 44CWCD104
2x4Ω
4ΩSubwoofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 36 Hz |
| Q factor | 0.72 |
| Sensitivity | 86.2 dB |
| Linear excursion | ± 13.2 mm |
| Program Power | 500 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.2dB
Thiele & Small parameters
- Resonance frequency (free air) fS 36Hz
- Mechanical quality factor QMS 19.29
- Electrical quality factor QES 0.74
- Total quality factor QTS 0.72
Large signal parameters
- Maximum linear excursion xmax 13.2mm
- Air volume displaced at xmax VD 473cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 2 x 4Ω
- DC resistance (in series) RE 7.5Ω
- Inductance (1kHz, in series) LE 3.96mH
Magnet
- Force factor (in series) Bl 14.7N/A
- Motor constant Bl/√RE 5.38N/√W
Diaphragm
- Effective diameter 214mm
- Effective area SD 360cm²
- Moving mass MMS 95.2g
- Moving mass (without air load) MMD 90.4g
Suspensions
- Stiffness KMS 4.86N/mm
- Compliance CMS 206µm/N
- Equivalent volume to the compliance VAS 37.7L
- Mechanical resistance RMS 1.12N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Baffle cutout diameter 231mm
- Mounting depth 122mm
- Volume occupied by the driver (estimated) 1.5L
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.webp.webp)
.webp.webp)
.jpg.webp)